BS : BUSAN UNIVERSITY
MS : KAIST
PHD : KAIST

Director, Hyundai Motor Company production technology.
Researcher, UNIVERSITY OF WATERLOO.
2002. 1~2004. 1 Member, Jeju National University Medium& Business Center.
2004. 1~2010. 5 Editorial Staff, The Korea Society for Power System Engineering.
2005. 4~2006. 3 Member, Research Institute of Advanced Technology, Jeju National University.
2006.10~Present Member, Korean Society for Precision Engineering.
2004. 1~2006.11 Academic Director, The Korean Society of Manufacturing Process Engineers
2004. 1~Present Editorial Staff, Korean Society of Laser Processing.
2007. 1~2007.12 Professional, Korea Institute of Science and Technology Information.
2008. 1~Present Member, The Korea Society of Mechanical Engineering.
2010. 1~Present Member, Korea Institute of Science and Technology.

- A Study on the Forming Analysis of Magnesium Alloy Sheet with One-step method(2008.12, JEJU NATIONAL UNIVERSITY RESEARCH INSTITUTE OF ADVANCED TECHNOLOGY)
- A Study on the Surface Treatment Method of VML-ST Trial Product with Rapid Prototyping(2008.12, JEJU NATIONAL UNIVERSITY RESEARCH INSTITUTE OF ADVANCED TECHNOLOGY)
- A Study on the Burr Formation in Shearing with Al Alloy(2007.06, The Korean Society of Manufacturing Process Engineers)
- A Study on the Burr Height in Shearing Steel Sheet for Automobile Parts(2007.08, The Korea Society for Power System Engineering)
- A Study on the Development of Lancing Process Method Using Forming Analysis(2008.01, Korean Society for Precision Engineering)
- A Study of Tool Planning for FRT-PLR-L/R Stamping Process by using Forming Analysis(2008.10, The Korea Society of Mechanical Engineering)
- Optimal Blank Design using Virtual Try-Out Method(2008.12, The Korean Society of Manufacturing Process Engineers)
- A Study on Static-Implicit Forming Analysis of the Magnesium Alloy Sheet(2008.12, The Korean Society of Manufacturing Process Engineers)
- A Study on the Behavior of Wrinkling in the Square Cup Deep Drawing of Al Alloy(2009.03, The Korea Society of Mechanical Engineering)
- Hot Forging Process Design Optimization Based on Approximate Model and FEM Simulation(2008.04, Materials Science Forum)
- Gear hot forging process robust design based on finite element method(2008.09, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY)

BS : KOREA UNIVERSITY
MS : KOREA UNIVERSITY
PHD : KOREA UNIVERSITY

University of Illinois at Urbana-Champaign, Post Doc.
Researcher, Korea Institute of Science and Technology.
Principal researcher, Samsung Electronics.
Member, American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
1990~Present Member, The Society of Air-Conditioning and Refrigerating Engineers of Korea
2004. 4~2006. 6 Member, Environmental Management Corporation.
2004. 8~2006.12 Member, Ministry of Knowledge Economy.
2007. 8~2008. 4 Judges, Korea Evaluation Institute of Industrial Technology.
2009. 1~Present Editorial Staff, The Korean Society of Marine Engineering.
2009.10~Present Member, Ministry of Knowledge Economy.
2010. 1~Present Advisory committee, Jeju special self-governing Province Development Corporation.
2010. 1~Present Advisory ProfessorKorea Institute of Science and Technology Information.

- A Study of Performance Characteristics on Hybrid Heat Pump System with Solar Energy as Heat Source(2007.03, The Korean Solar Energy Society)
- A Study on Hybrid Heating System with Anti-Superheating Devices(2007.05, The Korean Solar Energy Society)
- A Study on Optimum Application of Unutilized Energies in the Jeju Environment Facility(2007.08, The Korea Society for Power System Engineering)
- The Study on Efficiency Improvement of a Thermal Storage Tank for Solar Combined Heating System(2007.12, The Korean Solar Energy Society)
- In-situ Performance Evaluation of a Ground Source Heat Pump for an Air Conditioning System(2008.01, The Korean Society of Marine Engineering)
- Performance of a Refrigerant Heating Type Heat Pump by Changing of Driving Devices and Heat Exchangers(2008.01, The Society of Air-Conditioning and Refrigerating Engineers of Korea)
- Transient analysis of a variable speed rotary compressor(2010.02, Energy Conversion and Management)

B.S. Dep't of Mechanical Engineering, INHA Nat'l Univ(1987.03.-1993.02)
M.S. Dep't of Mechanical Engineering, INHA Nat'l Univ(1993.03.-1995.02)
Ph.D. Dep't of Mechanical Engineering, INHA Nat'l Univ(1997.09.-2003.02)

- Research Engineer at Daewoo Motors(1995.01∽1997.08)
- Visiting Researcher, University of Utah(2012.03∽2013.02)
- Director, Test & Evaluation Center for Clean Energy Development(2018.07∽present)

- Simulated production of electric power and desalination using Solar-OTEC
hybrid system(2017)
- Effects of spray-deposited oxidized multi-wall carbon nanotubes and
graphene on pool-boiling critical heat flux enhancement(2015)
- Critical heat flux enhancement in pool-boiling heat transfer using
oxidized multi-wall carbon nanotubes(2015)
- Regenerative OTEC systems using condenser effluents discharged from
three nuclear power plants in South Korea(2015)
- An experimental investigation into the effects of zeolites on the
formation of methane hydrates(2015)

연구실소개

융합기계설계 분야
Multidisciplinary and Interdisciplinary Mechanical Design (MIMD)
(융합기계설계 연구실 담당교수 : 고진환)

(2021) A self-propelled flexible plate with a keel-like structure, Vol. 33, 031902, Physics of Fluids
(2020) The turbulent/non-turbulent interface in an adverse pressure gradient turbulent boundary layer, Vol. 86, 108704, International Journal of Heat and Fluid Flow
(2019) Influence of Wall-attached Structures on the Boundary of the Quiescent Core Region in Turbulent Pipe Flow, Vol. 4, 114606, Physical Review Fluids
(2016) Structural Organization of the Quiescent Core Region in a Turbulent Channel Flow, Vol. 62, pp 455-463, International Journal of Heat and Fluid Flow

BS : BUSAN NATION FISHERIES UNIVERSITY
MS : BUSAN NATION FISHERIES UNIVERSITY
PHD : KYUNGNAM UNIVERSITY

1990. 3~1991. 2. Exchange professor, Busan National Fisheries University.
1996.12 ~1997.12 Exchange professor, U.S. Arizona State University.
2001. 1~2008.12 Director, The Korea Society for Power System Engineering.
2001. 3~2003. 2 College of Engineering Dean, Cheju National University.
2007. 5~2009. 4 University Department of Mechanical Engineering for Energy Systems.
2011. 1~2012.12 Present Vice President, The Korea Society for Power System Engineering.

- A Review of the performance improvement for Brayton cycle(2008.12, JEJU NATIONAL UNIVERSITY RESEARCH INSTITUTE OF ADVANCED TECHNOLOGY)
- An experimental study on Engine performance ofEco clean 21 emulsified fuel(2008.09, Korea Society of Technical Education and Traning)

BS : BUSAN NATIONAL FISHERIES UNIVERSITY
MS : KOREA MARITIME UNIVERSITY
PHD : KYOTO UNIVERSITY, JAPAN

Director, Center for Development of Small and Medium Business Support.
Exchange professor, USA UCLA.
1997. 3~1999. 2 Director, Industrial Technology Research Institute.
2001. 1~2006.12 Member, The Korea Society of Mechanical Engineering.
2001. 9~-2003. 3 Director, Research Institute of Advanced Technology, Jeju National University.
2004. 1~2009.12 Officer and Technical Director, The Korean Society of Ocean Engineers.
2004. 1~2008.12 Academic Director and Financial Director, The Korea Society for Power System Engineering.
2005.12~2006. 8 Director, Innovation Center for Engineering Education.

- Micro Hydropower Generation by Discharge Water of Sewage Treatment Plant in Jejudo(2007.12, JEJU NATIONAL UNIVERSITY RESEARCH INSTITUTE OF ADVANCED TECHNOLOGY)
- Research for Reserves and Utilization of Clean Energy in Jeju(2007.12, JEJU NATIONAL UNIVERSITY RESEARCH INSTITUTE OF ADVANCED TECHNOLOGY)
- FabricationofNano-PeriodicJosephsonJunctionArrayinSubmicronareaofBi2Sr2CaCu2O8 δ(Bi-2212)SingleCrystalWhisker(2009.12, JEJU NATIONAL UNIVERSITY RESEARCH INSTITUTE OF ADVANCED TECHNOLOGY)
- CharacterizationofSubmicronSizedJosephsonJunctionFabricatedinaBi2Sr2Ca2Cu3O10 δ(Bi-2223)SingleCrystalWhisker(2010.01, JOURNALOFSUPERCONDUCTIVITYANDNOVELMAGNETISM)
- AnomalousChangeofTransportCharacteristicsofGraphitePlanar-TypeMicro-structuresFabricatedbyFocusedIonBeam(2010.02, JOURNALOFSUPERCONDUCTIVITYANDNOVELMAGNETISM)

BS : INHA UNIVERSITY
MS : INHA UNIVERSITY
PHD : INHA UNIVERSITY

2004. 1~2005.12 Business Director, The Korea Society for Power System Engineering.
2004. 3~2006. 2, 2009. 1~2009.12 Editorial Staff, Korean Solar Energy Society.
2004. 7~2007. 1 Leader, Clean Energy Training and Education Center.
2005. 1~2005.12 Business Director, The Korea Society of Mechanical Engineering.
2007. 1~2008.12 Member, The Korea Society of Automotive Engineers.
2007. 6~2009. 6 advisory committee, Jeju Free International City Development Center.
2007. 5~2008. 4 advisory committee, Jeju special self-governing Province Development Corporation.
2007. 12~2008.12 Member, Korea Electric Association.
2002.12~2008.12 Member, Ministry of Knowledge Economy.
2008.10~Present Member, Korea Energy Management Corporation.
2010. 3~Present Leader, Test & Evaluation Research Center for Clean Energy Development.

- Performance Characteristics of In-Line Duct Fan Having Mixed Flow Impellers(2007.04, Korean Solar Energy Society)
- Characteristics of Lightning Occurred over Jeju Island for 2004-2006 and an Effect of Lightning on Wind Turbine Generator System(2008.02, Korean Solar Energy Society)
- Analysis of Annual System Operating Characteristics at Hangwon Wind Farm on Jeju Island(2008.04, Korean Solar Energy Society)
- Evaluation of the Performance on WindPRO Prediction in the Northeast Region of Jeju Island(2009.02, Korean Solar Energy Society)
- Year-to-yearvariationinwindresourceandassessmentofWAsPpredictionforwindmachinepower(2009.04, JOURNALOFMECHANICALSCIENCEANDTECHNOLOGY)
- CharacteristicsofwindvariationsonJejuIsland,Korea(2009.04, INTERNATIONALJOURNALOFENERGYRESEARCH)

BS : YONSEI UNIVERSITY
MS : YONSEI UNIVERSITY
PHD : YONSEI UNIVERSITY

Visiting Researcher, University of Texas.
Director, Jeju National University Medium& Business Center.
Leader, Industry-Academic Cooperation Foundation JEJU NATIONAL UNIVERSITY.
1997.12~2001. 3 Director, Jeju Small & Medium Business Center.
1998. 2~ Director, Korea Association of Industry, Academy and Research Institute.
2000. 1~ Editorial Staff, Korea Association of Industry, Academy and Research Institute.
2007. 6~2008. 8 Steering Committee, Jeju CCI.
2007.12~2008.12 Member, Jeju Science and Technology Promotion Council.

- The Performance Assessment Study of Solar Energy Cogeneration panel for Building Integrated System(2006.06, The Korean Solar Energy Society)
- Homogeneous Soil Temperature Variation Influenced by Solar Irradiation(2006.12, The Korean Solar Energy Society)